joint-point-counter-jointscbubba liked this post
Right here: http://zombietools.net/tools/
But you're gonna have to wait a bit... They seem to have a backlog on orders right now.
Well, my days of not taking you seriously are certainly coming to a middle.
From their FAQ:
Do you guys actually make these blades?
Yup, we do everything in our shop in Missoula, Montana using American made steel and aluminum. Here’s our basic process:
1) We cut the basic sword shape out of bars of quality 5160 spring steel. 5160 is one of the best steels to use for longer blades like ours as it is more durable and less prone to breakage than other steels (like cheap stainless).
2) For some of our blade models, we will then heat and hammer the blade into shape.
3) We grind the blade to within 20% of its final edge, and give the blade its “distal taper,” the gradual reduction of blade material from its handle to its point, which reduces weight and gives it its balance.
4) We then heat the blade to just above 1500 degrees and quench it in oil. This hardens the blade. We then put the blades in a tempering kiln to take them back up to around 450 degrees, which tempers it, or returns flexibility to the blade. The blade is then cleaned and polished.
5) Next, we cut our basic handle shapes from T6 aluminum, we attach the handle with steel pins, and then sculpt the handle to its final shape using grinders and files.
6) Finally, the blade is spattered with a beeswax/tar concoction and painted with ferric chloride acid which etches a pattern into the blade.
Last edited by scbubba; Feb 18th, 2013 at 05:13 PM.
Well, my days of not taking you seriously are certainly coming to a middle.
And perhaps Saul reminds CJ of what this other SWAT member was like. I imagine Saul to be pretty brave, I think KC has revealed that to us many times. He's totally SWAT material right?
This is my personal thinking as to why with almost 99.99% certainty that CJ was not SWAT.
Samantha had mentioned in conversation that as they had lost some of their best guys in the ambush, that “one of them was even SWAT”. Now if that were the case then we would know for sure that CJ was also SWAT. Being SWAT members, they would have known each other, or at least the male would have known about CJ. A female making SWAT is pretty rare and wouldn’t go unnoticed. It would have been plain to see for all that they knew each other, unless the SWAT guy promised not to say anything, but that doesn’t make much sense either. She may have the tactical skills found in a SWAT officer but I think CJ had no previous affiliation with anyone else in her tower, and that would include SWAT.
Osiris liked this post
I'm pretty sure CJ wasn't SWAT also. I get the feeling she is pretty young and if she were SWAT she would most likely be an "operator". This would require her to have a lot of experience in training in a shoot house. This training necessarily involves instruction and application of both single and team room clearing technique/procedure. As we found out at he Colony, CJ hasn't had any instruction/training in room clearing (poor red shirt girl...)
So, going with that line of thinking, I'm gonna say she's not SWAT. Or if she is, then she must have just gotten the job.
My best guess would be that she had a desk/planning job with LA police or a federal agency. This explains how she might be connected to some SWAT folks and how she would know where to get the crap ton of tactical and prep gear she has.
Well, my days of not taking you seriously are certainly coming to a middle.
I like that angle. Man. That would be some stuff. But if that is true, why didn't she recognize him. A guy with a face full of tattoos tends to stay with you.
As an aside. Who do you think CJ will hook up with in Season 4? Saul and Blondie are reunited, so who are we looking at as an eligible bachelor? Probably Robbins, Carl, or Muldoon. I think Puck and Riley are going to end up knocking boots.
Let me correct that last part. I just listened to the last bit of Chapter 36. Riley is gay, or at least bisexual and had a thing for Lizzy.
Bookmarks